▶ Used Knuth R 32 Basic for sale on Werktuigen (2024)

Year of construction: 2019, Condition: like new (used), Drilling capacity 32 mmColumn diameter 200 mmthroat 320 mm - 820 mmDistance spindle nose - table surface 320 mm - 860 mmYqiotxxDimension, cube table 400 mm x 400 mm x 350 mmDimension, machine table 1370 mm x 700 mm x 160 mmQuill stroke 240 mmMain spindleSpindle holder 4 MKSpeed range 75 1/min - 1220 1/minFeed rateFeed rates 0.1 mm/rev - 0.25 mm/revDrive powerMotor power main drive 1.5 kWDimensions and weightsDimensions (length x width x height) 1.41 m x 0.72 m x 1.89 mWeight

Condition: new, Small footprint design with Raytools cutting head and Raycus laser source.Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.Flb2qai7x

Year of construction: 1999, Condition: used, turning diameter 330 mmturning length 1000 mmswing diameter over bed slide 200 mmturning speeds 45 - 1800 U/minspindle bore 38 mmquill stroke 120 mmBodnvbghaqztailstock quill taper MT 3 total power requirement 2,2 kWweight of the machine ca. 880 kgdimensions of the machine ca. 1950 x 800 x 1200 mm- 4-jaw chuck Ø160 mm RÖHM- MULTIFIX quick-change holder with 1x insert- movable tailstock- Lathe chuck protection- Chip back wall- Operation manual

drilling capacity: 60 mm, Condition: new, Infinitely variable spindle speed, feed gear and a wide range of sizes characterise our proven bestseller series.Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.Bhaqpqdjkcr

Year of construction: 2022, Condition: new, The KB-S series is a reliable bench drill series for workshops and industry. The machines convince with a compact and modern design, high rigidity and excellent workmanship. These models are part of the basic equipment every mechanical workshop needs.- Compact and powerful- Digital speed display- Tapping feature- Integrated work light- Delivered with drill chuck and viseWORKING AREADrilling capacity32 mmTapping capacity (max.)M 24Table set up area330 mm x 330 mmSpindle nose-to-table surface distance813 mmSpindle nose-to-foot distance1236 mmThroat265 mmColumn diameter100 mmQuill stroke150 mmCvenowroynHEADSTOCKSpeed range320 1/min - 1820 1/minSpindle mount3 MT DRIVE CAPACITYMotor rating main drive1,5 kW MEASURES AND WEIGHTSOverall dimensions (length x width x height)-height1 m x 0,6 m x 2,1 mWeight345 kg

Year of construction: 2008, Condition: good (used), machine/vehicle number: 142216, Offer 23208Technical data:- max. cutting width 3200 mm- max. cutting capacity at 45 Kp/mm² 12 mm- stand projection 175 mm- Cutting angle 1.48 °- man. Cutting gap adjustment- Number of hold-down devices 13 pcs- Stroke rate up to 10 1/min- Front angle fence approx. 1100 mm- 2 front support arms approx. 1100 mm- mot. Back gauge with positioning control up to 1000 mm- Back gauge with light barrier- Cutting line lighting- Working height 860 mm- E - foot switchStqbyfck- Drive 400 V / 19.5 kW- Space requirement approx. W 4150 x H 2150 x D 2300 mm- Weight approx. 8.5 t

drilling capacity: 60 mm, Condition: as good as new (ex-display), Servo-conventional radial drilling machine with large throat depth.Biw7kpbxlowOur complete data sheet with all details and technical data can be found here under Documents as a PDF download.

Year of construction: 2022, Condition: new, The drilling machines of the SSB Xn series are the right choice for every workshop, both for repair and production. These universal drilling machines have a thick-walled column, powerful drives and robust gearboxes for spindle and feed. The large work area and the large universal clamping tables allow easy handling and processing of small workpieces, but also large and heavy parts and assemblies. With its proven reliability, this series has been one of our best-selling solutions for more than 20 years.Wyuxkqm- Tilting table for drilling at an angle- Automatic drilling feed- Work table with 2-axes of rotation for flexibility in operation- Well-considered safety protectionWORKING AREADrilling capacity32 mmTapping capacity, steelM 20Table set up area500 mm x 420 mmTable stroke490 mmQuill stroke160 mmTable swivel range (max.)± 45°Spindle nose-to-table surface distance630 mmSpindle nose-to-foot distance1185 mmThroat320 mmColumn diameter120 mmHead swivel range± 50°Table load capacity100 kgHEADSTOCKSpindle mountMK 4Spindle speed125 1/min - 3030 1/min FEEDQuill feeds0,1; 0,2; 0,3 mm/R DRIVE CAPACITYMotor rating main drive1,2 kW MEASURES AND WEIGHTSOverall dimensions (length x width x height)-height0,84 m x 0,5 m x 1,96 mWeight

Condition: new, Solid precision bench lathe with large center widthOur complete data sheet with all details and technical data can be found here under Documents as a PDF download.Jsrwmob982

drilling capacity: 60 mm, Condition: new, Servo-conventional radial drilling machine with advanced functions and large touch screen.Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.Ktatz8phcf

drilling capacity: 60 mm, Condition: new, Servo-conventional radial drilling machine with advanced functions and large touch screen.Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.V9rcvokc

Condition: as good as new (ex-display), Fully automatic band saw with special equipment.Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.Djs2ol

Condition: excellent (used), The HB BS series bandsaw is designed for precise mitre cuts of up to 45 degrees and is ideal for workshops and production. With this model, it is not the vice that swivels with the material, but the saw bow. The saw arm feed can be infinitely adjusted via a hydraulic valve and can also be adjusted during processing. Pivoting, clamping and clamping are done manually. The motor transmits its power via a low-maintenance, vibration-free V-belt.Boeut9qyy2g

Year of construction: 2004, Condition: used, sheet width 3200 mmplate thickness 0.5 - 6.0 mmcutting angle 1° 30 °no. of strokes 14 Hub/minback stop - adjustable max. 1000 mmdown holder 13 Stückwork height max. 800 mmControl "EASY-VIEW" oil volume 270 lvoltage 400 Vengine output 7.5 kWweight 6100 kgrange L-W-H 4010 x 1610 x 1620 mm from a maintenance workshop - good condition (!!) was only used sporadically according to the previous seller New price ~ 35.000 eurosXsohvsfFurnishing:- electro-hydraulic swing cutting shears- KNUTH "EASY-VIEW" touch CNC positioning control* Robust back gauge with high-quality ball screws- Machine frame & knife bar made of sturdy welded construction- The proven swing-cut design allows for a small knife angle* for optimal cutting quality and minimal distortion on the workpiece- hydraulically acting hold-down devices- electro-motoric cutting gap adjustment- continuous adjustment of the cutting length for short strokes- Machine side stand with projection- 1x long side stop, including tilting cam and mm scale- 3x front support arms- Support table including ball rollers- rear protective device (safety doors)- front finger/encroachment protection- 1x freely movable foot switch including emergency stop button- "CE" marking- User manual (PDF)* Machine link:?machineno=1008-9325321

Condition: new, The ABS 320 PLC is a robust fully automated band saw designed for maximum reliability. The automatic feed is driven via rolls in the clamping jaws. Operation is simple, and the touchscreen guides the operator through the machine setup.E2na3kmOur complete data sheet with all details and technical data can be found here under Documents as a PDF download.

Condition: new, Sturdy box column design reduces torsion and vibration for superior drilling, reaming and tapping performanceDmngapOur complete data sheet with all details and technical data can be found here under Documents as a PDF download.

Condition: as good as new (ex-display), Fully automatic band saw with special equipment.This machine is equipped with interesting accessories for sawing pipes.Ysnm0chmOur complete data sheet with all details and technical data can be found here under Documents as a PDF download.

Year of construction: 1991, Condition: used, 0 300 mmthroat 600 mmsaw band length 3.950 mmtable - swivable 4 Ways: 15 Gradtable height 1.015 mmdimensions of saw-band 3.950 x 3-16 mmcutting speed 16 - 65 m/mincutting speed 96 - 390 m/minsurface of working table 600 x 500 mmtotal power requirement ca. 1,5 kWweight of the machine ca. 700 kgdimensions of the machine ca. 1,0 x 1,5 x 2,1 mBandsawKNUTH - VB 610Dpa23l

Year of construction: 2005, Condition: used, sheet width 3100 mmplate thickness 6 mmrear stop 1000 mmcutting angle 1°15' °down holder 14 Stkno. of strokes 15 Hub/minoil volume 170 ltotal power requirement 15 kWSe2cdkvtfddimensions of the machine ca. 3850 x 3100 x 1950 mmweight 6900 kgFurnishing:- electric back gauge 750 mm- front support plates with ball rollers- Light barrier behind the machine- Hydraulic cutting adjustment- Cutting gap regulation via handwheel- LED cutting edge lighting- 1x side stop with scale 1500 mm- 1x freely movable foot switch- Operation manual

Year of construction: 2009, Condition: used, x-travel 950 mmy-travel 400 mmz-travel 500 mmtool taper ISO 50 throat 510 mmquill stroke 105 mmspindle turning speed range 18 - 1800 U/minfeeds 16 - 627 mm/minrapid traverse 1670 mm/mintable-size 1400 x 400 mmtable load capacity 500 kgT-slots 3x14x100 mmdistance spindle /table 150 - 650 mmengine output 9,0 kWweight 3660 kgdimensions of the machine ca. 2290 x 1770 x 2120 mm current new price approx. 60.000 euros Special price on requestThe heavy universal bed milling machine offers wide guides and highDrive power for superior cutting performance and is with yourExtensive equipment ideal for plant and mechanical engineeringsuitable. The heavy vertical milling head can be swiveled right and left,The quill can be moved manually and the spindle speed can be adjusted continuously regulate. The feed in the Y and X axes can be done via a robustManual transmission can be varied. All axes have rapid traverse and theLarge clamping table offers plenty of space for workpieces and clamping devices.It is not the machine table (with the workpiece) that is moved in the Z axis, but rather the milling head - greater stability and lower vibrations lead to more Precision with very high table load capacity! This is further reinforcedE2owpoyEffect through the large, heavy gray cast iron frame (Meehanite) and theextremely wide flat guides.Furnishing :- Continuous speed regulation by frequency converter- Rigid right-angle guides guarantee lasting accuracy- Meehanite gray cast iron frame- ± 30° swiveling milling head- Hardened and ground guideways in all axes- The machine is equipped with a 3-axis position display as standard* Greater work accuracy* Lower error rate* Greater manufacturing reliability* Significant time savings* Increased productivity* Easy to read display* User friendly features* Clearly arranged keyboard* Resolution 0.01/0.005mm- Central lubrication- Coolant device- Operation manual* Machine link:mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008- 9131205

Year of construction: 2018, operating hours: 1,000 h, Condition: repair required (used), Plasma cutting systemKNUTH DST 1530Plasma cutting system KNUTH DST 1530Machine dataMake: KNUTHModel: DST 1530Type: PJ DSK 1530Year of construction: 2018S/N: 166177Operating hours: approx. 1,000Power: 68 kWVoltage: 400 VFrequency: 50/60 HzPower sourceMake: KJIELLBERGModel: Smart Focus 300S/N: 11.037.3002Weight: 488 kgMaterial thickness range: 1 - 80 mmFilter unitMake: VANTERMModel: PL-4000S/N 1905-123-249Air flow: 4,000 m³/hWeight: 602 kgSerqufp28tNotes:Cutting head dismantled, estimated repair costs approx. 3,000 EUR net

Year of construction: 2016, Condition: used, Horiz. Mitre bandsaw KNUTH with minimum quantity lubrication type HB 250ABandsaw for metalworking with swivel saw frame.Serial no. 201603004 Year of manufacture 2016Sawing range at 90° round Ø 225 mmSawing range for 90° square 190 x 190 mmSawing range for 90° rectangle 245 x 150 mmSawing area at 45° round Ø 145 mmSawing area for 45° square 145 x 145 mmSawing area for 45° rectangle 200 x 145 mmSawing area at 60° round 90 mmSawing area at 60° square 90 x 90 mmSawing area for 60° rectangle 110 x 70 mmSaw band 2480 x 27 x 0.9 mmRoller diameter 290 mmBelt speed 45 / 90 m/min.Compressed air requirement approx. 5 bar (minimum quantity lubrication)Working height 910 mmMotor power 1.1 kWConnected load 400 Volt, 50 Hz- Saw blade speed via 2-stage electric motor- Infinitely variable lowering via hydraulic lowering cylinder- Automatic limit stop after material average- Infinitely variable swivel saw arm for mitre cuts up to 60°- Pressure gauge for band tension- Vice with short-stroke quick clamping device- Coolant device with electric pump- Minimum quantity lubrication UNI-Microspray I (year of manufacture 2017)- Workpiece stopWsozmjv2mSpace requirement L x W x H 1450 x 700 x 1450 mmWeight 185 kgVery good condition

bending angle: 135 °, Year of construction: 2022, operating hours: 5 h, Condition: like new (used), Functionality: fully functional, Ladies and Gentlemen,We are offering you a folding machine from Knuth, model SBS E 2540/1.5.The machine comes from the site liquidation and is currently stored with other Knuth machines and a four-way gas forklift at Königsee in Thuringia.The machine was purchased with two others at the end of 2022 and delivered in 2023. Commissioning by a Knuth technician took place in the first quarter of 2023. The folding knives were subsequently bevelled, as the machine was intended for manual post-processing in the form of round bending of aluminum sheets for a prototype. This took place on a very small scale due to the late delivery of the folding knives.The machine was preserved for storage.Apart from possible signs of transportation, the machine is in mint condition. The RRP of the machine was €8,550 (€10,174.50 gross).The invoice and accessories supplied by Knuth are available, an inspection on site in Königsee is possible by arrangement.G938p99uCollection is preferable, shipping is possible for an additional charge and by arrangement.A forklift truck is currently available for loading.Further information on the machine can be found in the attached data sheets and on the Knuth homepage.We are at your disposal for questions and serious offers.Thank you for your interest.

Year of construction: 1997, Condition: used, pressure 200 tchamfer lenght 3550 mmdistance between columns 3050 mmcolumn arm 200 mmajustment speed 100 mm/secworking feed 8,0 mm/secreturn speed 120 mm/secstroke 190 mmtable height 900 mmdayligth 350 mmengine output 15,0 kWoil volume 150 ltr.Control ELGO weight of the machine ca. 13500 kg.range L-W-H 4800 x 1750 x 2800 mm - in working condition - machine video - youtube.com/watch?v=rRaDIN8M660Furnishing:- simple / electro-hydraulic NC press brake- with digital ELGO display* digital position display for backgauge (X axis)* digital position display for depth adjustment (Y1+Y2 axis)- swiveling operation, front left- electro-motorized back gauge - X axis- electro-motorized adjustment of the immersion depth - Y axes* Machine with torsion shaft- front support arms- continuous adjustment of the pressure force (upper beam)- 1x universal matrix block, reversibleMd7e32jf- 1x set of split deer foot upper tool- 1x freely movable 2 hand/foot control* Machine link:mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008- 9308265

Year of construction: 2018, operating hours: 1,000 h, Condition: used, machine/vehicle number: 166177, Machine dataMake: KNUTHModel: DST 1530Type: PJ DSK 1530Year of construction: 2018S/N: 166177Operating hours: approx. 1,000Power: 68 kWVoltage: 400 VFrequency: 50/60 HzPower sourceMake: KJIELLBERGModel: Smart Focus 300S/N: 11.037.3002Weight: 488 kgMaterial thickness range: 1 - 80 mmFilter unitMake: VANTERMModel: PL-4000S/N 1905-123-249Air flow: 4,000 m³/hWeight: 602 kgNotes:Cutting head dismantled, estimated repair costs approx. 3,000 EUR netC92l79eFor sale in online auction against highest bid. Follow the link for more photos and information.